Oven and Range Repair Services in Phoenix Metro
Gas or electric, built in or freestanding, cooking appliances tend to fail at the igniter, the element, the sensor or the control. We work out which one it is and tell you the cost before any repair begins. Standard single wall ovens are covered when they are safely accessible and within your technician's capability. We don't repair double built-in wall ovens.
- Service call fee waived with repair
- Gas and electric
- No double built-in wall oven repair
Oven, range or stove?
An oven is the enclosed compartment that bakes and broils. A cooktop is the surface with burners or elements, set into a counter. A range is one appliance that has both. "Stove" is the everyday word for a range, and sometimes for a cooktop.
Call it whatever you normally call it. All of these are handled on this page, and when you request service you can choose Oven / Range and describe the problem in your own words.
When an oven or range needs service
Won't heat
On a gas oven, a weak igniter is a frequent cause, because it can glow without opening the gas valve. On an electric oven we test the bake element, sensor and control.
Wrong temperature
Food takes longer than the recipe says or burns on the outside. We test the temperature sensor and how the oven cycles against what the display shows.
Uneven baking
One side browns before the other. A failing element, a convection fan that has stopped or a door that doesn't seal can all be responsible.
Broiler not working
The bake side works, the top doesn't. That usually means the broil element or broil burner, or the circuit feeding it.
Door and latch trouble
A door that won't close squarely, a torn gasket or a self-clean latch that stays locked.
Controls and error codes
A blank or flickering display, keys that don't respond or codes that keep coming back.
Cooktop and surface burner repair
This covers built-in cooktops and the top of a range. We work on gas, electric coil and smooth-top surfaces. A request for an induction cooktop gets an individual capability review first.
Burner won't light
You hear clicking but get no flame, or there's no clicking at all. On gas surfaces we look at the igniter, spark module and burner parts.
Clicking that won't stop
An igniter that keeps sparking after the burner is lit usually points to a switch, moisture or the spark module.
Weak or uneven flame
A flame that's lazy, lopsided or sputtering can come from a dirty or misaligned burner, or a problem with the valve.
Element won't heat or stays on high
A dead coil or radiant zone may be the element itself or the control switch feeding it. A zone stuck on high deserves attention quickly, so stop using it and call us.
What's covered, and what isn't
Repairs we perform
- Bake and broil elements on electric ovens
- Oven igniters and gas valves on gas ovens and ranges
- Temperature sensors and thermostats
- Control boards and displays
- Convection fan motors
- Door gaskets, hinges and latches
- Surface igniters, spark modules and burner switches
- Electric surface elements and their controls
Work we do not offer
- Repairs on double built-in wall ovens
- Microwaves, including one mounted over the range
- Suspected gas leaks, which go to 911 and your gas utility first
Tell us this when you request service
- Gas or electric
- Range, cooktop or wall oven, and for a wall oven, whether there is one cavity or two
- The model number, usually on a plate around the door frame or in the storage drawer
- Any error code on the display
- Whether the problem started right after a self-clean cycle
Service call fee waived with repair.
We tell you the service call fee before your appointment is confirmed. Your technician finds the problem and gives you the repair cost before any work starts. Approve the repair and once it is completed, the fee is waived. Decline it and you pay only the service call fee. If your technician completes the diagnosis and the repair can't go forward, the service call fee still applies and we'll tell you what we found.
Tell us the oven type when you call. We don't repair double built-in wall ovens, so that's a question for the phone, before anyone drives out.
Weighing a repair against a new range
Once the technician has a diagnosis, you'll have a repair price to compare. Here's what tends to matter most.
- Usually worth repairing
- Igniters, elements, sensors, door parts and surface switches on a range or oven in otherwise good shape.
- Worth a harder look
- A control board on an older model where the part is hard to find, or an interior that's rusting or chipped.
- Age, with a caveat
- An NAHB study from 2007 estimated 15 years for a gas range. It also says how much an appliance gets used makes a real difference, and that kitchens are often updated for looks rather than necessity. It's a reference point and nothing firmer.
How an oven or range request works
Send your request
Tell us the appliance, what it's doing and your ZIP code. It takes about two minutes online, or you can call us.
We call to confirm
A request isn't an appointment yet. Our team calls to go over the fee and work out a time that fits your day.
Diagnosis, then your decision
Your technician tracks down the problem and tells you what the repair will cost. Nothing gets repaired until you say so.
Add your range to a yearly maintenance visit
Enrolled properties get one preventive maintenance visit each paid year covering up to five appliances, and eligible repair labor costs less: 15% off at the enrolled property. The earliest maintenance date is 14 days after that appointment is created. Repair requests aren't subject to that wait.
Oven, range and cooktop questions
Do you repair double ovens?
Standard single wall ovens and the oven section of freestanding and slide-in ranges are supported when the unit is safely accessible and within your technician's capability. We do not repair double built-in wall ovens, the kind with two oven cavities stacked in one cabinet opening.
How can I tell if my oven's temperature is really off?
Put a standalone oven thermometer on a center rack, preheat, and compare once the oven says it's ready. If the gap is big or changes from day to day, a technician can test the sensor and the controls.
One burner won't light. Can I keep using the others?
If there's no gas smell, you can leave that burner off and stop trying to light it, then request service. If you smell gas at any point, follow the safety steps on this page instead.
Why did my oven stop working right after a self-clean?
Self-clean runs at very high heat, and that can expose a part that was already weak, such as a control, a latch or a sensor. Mention the timing when you call.
Oven and range repair by city
City pages with coverage details, or see all our service areas. Other appliances are on the appliance repair overview, and you can request service online.
More kitchen repairs
Send us the oven or range details
Let us know whether it's gas or electric, and what it's doing. We call back to confirm the fee and set a time, and nothing gets repaired until you approve it.